milk cooling tank 300 ltr

Dairy farms rely on highly efficient cooling of the milk to keep the milk at a consistent temperature of about 4 °C in the milk

tanks until the milk is collected for further processing.

Milk is stored at the farms in either closed or open milk tanks. To maintain the quality of the milk, it is quickly cooled from

38 °C leaving the cow to 4 °C in the milk tank. The milk tank is typically equipped with a mixer to accelerate the cooling process and homogenize the milk.

Equipment features:

★ Our refrigeration storage tank is mainly composed of tank body, mixer, refrigeration unit, electrical control and other parts.

★ Its tank body is all made of stainless steel SUS304, after precision polishing, dirt is not easy to accumulate, easy to clean and corrosion resistant.

★ The tank insulation layer is filled with rock wool or polyurethane foam insulation material with low thermal conductivity, which is light in weight and good in insulation performance.

★ The stirring device is composed of a motor, a reducer and a stirring device. The stirrer and the tank are connected by flanges, and the stirrer is driven by the reducer.

★ The refrigeration system consists of a refrigeration unit, a direct cooling jacket plate, etc. The direct cooling jacket plate manufacturing process is advanced and the effect is ideal; the refrigeration unit is equipped with the corresponding water-cooled condenser (used when the ambient temperature is high, and drains the cooling water when not in use). The cooling effect is ideal.

★ At present, most of the condensing units use Freon as the coolant. Freon is the trade name of a special brand and is widely used. So far only two models have been used, namely R12 (CFC) and R22 (HFC)